Clubhouse and common-area finishes
Held to a residential finish standard, which is exactly what makes replacement slow and expensive.
For Collier County
Naples.Finish-grade, in place.
Architectural finishes and commercial window film in Naples and Collier County, for condo and clubhouse interiors held to a finish standard.
3M authorized, LEED and ASID credentialed, statewide in Florida
Working in Naples,statewide from Florida.
Engineered Group works throughout Florida, statewide, and names Naples on its own service list. Condo common areas, clubhouses and hospitality interiors on the Gulf coast are held to a finish standard that makes replacement expensive and slow. Architectural film reaches the same standard over the existing substrate, and the building stays open while it happens.
What we install
Naples work,surface by surface.
Clubhouse and common-area finishes
Held to a residential finish standard, which is exactly what makes replacement slow and expensive.
View
Decorative and privacy glass
Glazed dividers in clubs and amenity rooms need privacy without losing light.
View
Security film on coastal glazing
Bonds glazing so broken glass stays in the frame; we confirm the specification per building.
View
Clubhouse millwork
Bars, reception joinery and built-ins refinished on site rather than ripped out.
View
Amenity walls and ceilings
Refinished over the existing substrate while the building stays open.
View
In Naples
What usuallymatters most here.
How it happens
Four steps,no demolition.
Survey and sample
We look at the substrate as part of the free estimate and tell you what preparation, if any, it needs, then put a physical sample of the exact finish in your hands before anything is ordered.
Dry application
Our own team installs it using a dry application process, with no wallpaper paste, so the film can be placed and adjusted before it is squeegeed down.
The building stays open
The film goes onto the surface you already have, so there is no demolition, no construction dust, no VOCs and no waiting while a replacement is fabricated.
It stays repairable
Architectural film lasts up to 12 years indoors and 5 outdoors, resists water, dirt and normal wear, and if it chips it can be patched so you cannot tell where.
Up to 60%saved vs. full renovation
1,000+patterns to specify from
12year interior lifespan
Class Afire-rated door film
Material lines
Hundreds of patterns,specified and installed.
Across Florida
Work from elsewherein the state.
Who we work with
The people whocall us in Naples.
Our completed workacross Florida.
We have not published a project in Naples yet. These are the buildings we have finished elsewhere in the state, each one documented with its own photographs and the materials used.
FAQs
Frequently asked questions.
01Will the finish hold up in a coastal building?
Architectural film resists water, dirt and normal wear and cleans with a non-abrasive cleaner or hot water. It lasts up to 12 years indoors and 5 outdoors, and if it chips or scratches it is patched rather than replaced.
02What area do you serve?
We work throughout Florida, statewide, from single-site jobs to multi-building campuses.
03Can one contractor handle the finishes, the glass and the window film?
Yes. We self-perform the whole interior surface package, walls, ceilings, columns, elevator cabs, doors, millwork, casework and glass, alongside commercial window film, decorative glass film, safety and security film and anti-graffiti film. Our own team installs all of it, so a lobby, its cabs and its glazing run on one schedule under one contractor instead of being split across trades.
04What should I look for when choosing an architectural finishes installer?
Ask three things. Whether the installer is trained and certified for pressure-sensitive architectural film, because surface preparation, temperature and experience decide the finish you end up with. Whether they self-perform or subcontract, since one team across walls, cabs, doors and glass means one schedule and one point of responsibility. And whether they will put a physical sample of the exact finish in your hands before you commit, our estimates are free and always come with one.
05What surfaces can architectural film go on?
Walls, ceilings, furniture, elevators, columns, doors, millwork, casework and glass. The surface needs to be smooth, solid and non-porous.
06How long do architectural finishes last?
Architectural film lasts up to 12 years indoors and 5 years outdoors. Because the installation process is quick and clean, repairing or renewing the film later is straightforward.
07How much does an estimate cost?
Estimates are completely free. Tell us the surface and the scope and we will come back with a real number, along with a sample of the finish.
Working in Naples?Get a quote.
Tell us the building and the surfaces. We will come and look at it, and the estimate is free.