Architectural finishes and window film in Fort Lauderdale and Broward County, from corporate lobbies to condo common areas.
3 Fort Lauderdale-area projects you can look at.
Engineered Group works throughout Florida. Broward projects have run from a value-engineered corporate lobby to condo construction and tower resurfacing.
Pier 66
Fort Lauderdale, Florida
Walls, Elevators
Amrit Ocean Resort
Riviera Beach, Florida
Disney Contemporary Resort
Hard Rock
Mel's Drive-In
Morgan & Morgan
Visit Orlando
Orlando, Florida
Fort Lauderdale work, surface by surface.
Corporate lobby renovation
Value-engineered lobby work over the existing substrate, which is what Radice Corporate Center was.
Column wrapping
Round, square and tight-radius lobby columns in wood, stone and metal effects.
Cab and elevator-door refinishing
Condo and office cabs resurfaced without taking the car out for a rebuild.
Common-area walls and ceilings
Condo corridors and amenity floors, refinished with no demolition and no dust.
Solar and glare control
Waterfront glazing takes sun on every elevation; film cuts heat gain and fading.
Casework and built-ins
Reception desks, cabinetry and millwork refinished in place.
Original. Reimagined.
Original is the starting point. Reimagined is a new perspective, without replacement. Drag the handle on any project.
Hundreds of patterns, specified and installed.
A few of the spaces we have done.
Frequently asked questions.
Can a corporate lobby be refinished without closing it?
Yes. The work happens on the walls, columns and casework already in place, with no demolition and no dust, which is what makes a value-engineered lobby renovation possible in a building that stays open.
What area do you serve?
We work throughout Florida, statewide, from single-site jobs to multi-building campuses.
Can one contractor handle the finishes, the glass and the window film?
Yes. We self-perform the whole interior surface package, walls, ceilings, columns, elevator cabs, doors, millwork, casework and glass, alongside commercial window film, decorative glass film, safety and security film and anti-graffiti film. Our own team installs all of it, so a lobby, its cabs and its glazing run on one schedule under one contractor instead of being split across trades.
What surfaces can architectural film go on?
Walls, ceilings, furniture, elevators, columns, doors, millwork, casework and glass. The surface needs to be smooth, solid and non-porous.
How disruptive is the work?
Very little. The film is applied on site to the surface you already have, so there is no demolition, no construction dust, no VOCs and no operational downtime while a replacement is fabricated and delivered.
How much can I expect to save?
Clients typically save up to 60% on an architectural finishes project compared with tearing the surface out and replacing it. The exact figure depends on the surface, the substrate and the size of the job, which is why the estimate is free.
How much does an estimate cost?
Estimates are completely free. Tell us the surface and the scope and we will come back with a real number, along with a sample of the finish.