For South Florida
Miami towers,refinished in place.
Architectural finishes and window film in Miami, for buildings that need to look renewed without coming out of service.
3M authorized, LEED and ASID credentialed, statewide in Florida
What we install
Miami work,surface by surface.
Elevator lobbies and cabs
High-rise cabs where downtime is the expensive part, resurfaced in place over the existing panels.
Tower corridors, floor by floor
Corridors and lift lobbies refinished a floor at a time so the tenancies below stay open.
Fire-rated corridor doors
Class A fire-rated film over the doors already hung across multi-floor tenancies.
Security film on street-facing glass
Bonds the glazing so broken glass stays in the frame, against impact and forced entry.
Decorative and privacy glass
Tenant branding and glazed dividers in new-build office fit-outs, on the pane already installed.
The transformation
Original.Reimagined.
Original is the starting point. Reimagined is a new perspective, without replacement. Drag the handle on any project.
OriginalReimagined
OriginalReimagined
How it happens
Four steps,no demolition.
Survey and sample
We look at the substrate as part of the free estimate and tell you what preparation, if any, it needs, then put a physical sample of the exact finish in your hands before anything is ordered.
Dry application
Our own team installs it using a dry application process, with no wallpaper paste, so the film can be placed and adjusted before it is squeegeed down.
The building stays open
The film goes onto the surface you already have, so there is no demolition, no construction dust, no VOCs and no waiting while a replacement is fabricated.
It stays repairable
Architectural film lasts up to 12 years indoors and 5 outdoors, resists water, dirt and normal wear, and if it chips it can be patched so you cannot tell where.
Material lines
Hundreds of patterns,specified and installed.
Miami work
A few of thespaces we have done.
Who we work with
The people whocall us in Miami.
FAQs
Frequently asked questions.
01Can a lift lobby be refinished while the tower is occupied?
Yes. Cab walls, doors and surrounds are resurfaced over the existing panels rather than stripped out, so the car is out of service for the install rather than for the weeks a rebuild and its lead time would take.
02What area do you serve?
We work throughout Florida, statewide, from single-site jobs to multi-building campuses.
03Can one contractor handle the finishes, the glass and the window film?
Yes. We self-perform the whole interior surface package, walls, ceilings, columns, elevator cabs, doors, millwork, casework and glass, alongside commercial window film, decorative glass film, safety and security film and anti-graffiti film. Our own team installs all of it, so a lobby, its cabs and its glazing run on one schedule under one contractor instead of being split across trades.
04What surfaces can architectural film go on?
Walls, ceilings, furniture, elevators, columns, doors, millwork, casework and glass. The surface needs to be smooth, solid and non-porous.
05How disruptive is the work?
Very little. The film is applied on site to the surface you already have, so there is no demolition, no construction dust, no VOCs and no operational downtime while a replacement is fabricated and delivered.
06How much can I expect to save?
Clients typically save up to 60% on an architectural finishes project compared with tearing the surface out and replacing it. The exact figure depends on the surface, the substrate and the size of the job, which is why the estimate is free.
07How much does an estimate cost?
Estimates are completely free. Tell us the surface and the scope and we will come back with a real number, along with a sample of the finish.
Working in Miami?Get a quote.
Tell us the building and the surfaces. We will come and look at it.