For Central Florida
Orlando work,already on the ground.
Architectural finishes and window film across Orlando and Central Florida, resurfacing what is already there instead of replacing it.
3M authorized, LEED and ASID credentialed, statewide in Florida
Proof
7 Orlando-area projectsyou can look at.
Engineered Group works throughout Florida, and Orlando is where a large share of that work sits. The projects below are all Orlando-area, all completed, and all documented on this site.
What we install
Orlando work,surface by surface.
Guest-room and corridor doors
Resort and hotel doors refinished over the slab already hung, Class A fire-rated, without touching the opening.
Lobby and corridor finishes
Hospitality interiors that have to turn around between seasons, resurfaced rather than stripped out.
Elevator cab refinishing
Cab walls, doors and surrounds in hotel and office towers, done without pulling the car for a rebuild.
Front-of-house casework
Reception desks, bars and built-ins in restaurants and resort lobbies, refinished on site.
Feature walls and hard ceilings
Theatres, function rooms and lobbies, refinished over the drywall and panelling already there.
Solar control film
Central Florida glazing carries heat gain most of the year; solar film cuts it without replacing a pane.
The transformation
Original.Reimagined.
Original is the starting point. Reimagined is a new perspective, without replacement. Drag the handle on any project.
OriginalReimagined
OriginalReimagined
OriginalReimagined
OriginalReimagined
OriginalReimagined
OriginalReimagined
OriginalReimagined
OriginalReimagined
OriginalReimagined
OriginalReimagined
OriginalReimagined
How it happens
Four steps,no demolition.
Survey and sample
We look at the substrate as part of the free estimate and tell you what preparation, if any, it needs, then put a physical sample of the exact finish in your hands before anything is ordered.
Dry application
Our own team installs it using a dry application process, with no wallpaper paste, so the film can be placed and adjusted before it is squeegeed down.
The building stays open
The film goes onto the surface you already have, so there is no demolition, no construction dust, no VOCs and no waiting while a replacement is fabricated.
It stays repairable
Architectural film lasts up to 12 years indoors and 5 outdoors, resists water, dirt and normal wear, and if it chips it can be patched so you cannot tell where.
Material lines
Hundreds of patterns,specified and installed.
Orlando work
A few of thespaces we have done.
Who we work with
The people whocall us in Orlando.
FAQs
Frequently asked questions.
01Can you work in an operating hotel or restaurant?
Yes, and most of our Orlando-area work is exactly that. The film is applied to the surface you already have, so there is no demolition, no construction dust and no VOCs, and the room, corridor or dining space goes back into use as we finish it.
02What area do you serve?
We work throughout Florida, statewide, from single-site jobs to multi-building campuses.
03Can one contractor handle the finishes, the glass and the window film?
Yes. We self-perform the whole interior surface package, walls, ceilings, columns, elevator cabs, doors, millwork, casework and glass, alongside commercial window film, decorative glass film, safety and security film and anti-graffiti film. Our own team installs all of it, so a lobby, its cabs and its glazing run on one schedule under one contractor instead of being split across trades.
04How disruptive is the work?
Very little. The film is applied on site to the surface you already have, so there is no demolition, no construction dust, no VOCs and no operational downtime while a replacement is fabricated and delivered.
05How much can I expect to save?
Clients typically save up to 60% on an architectural finishes project compared with tearing the surface out and replacing it. The exact figure depends on the surface, the substrate and the size of the job, which is why the estimate is free.
06Can I have the film installed by anyone?
We strongly recommend a trained, certified installer. Unlike conventional wallcovering or laminate, these films use a pressure-sensitive adhesive, and the finish you end up with depends heavily on surface preparation, temperature and experience.
07How much does an estimate cost?
Estimates are completely free. Tell us the surface and the scope and we will come back with a real number, along with a sample of the finish.
Working in Orlando?Get a quote.
Tell us the building and the surfaces. We will come and look at it.