Guest-room and corridor doors
Hundreds of slabs, long lead times and a fire rating to preserve – film goes over the door already hung.
For Volusia County
Daytona Beach.Between seasons.
Architectural finishes and commercial window film in Daytona Beach and Volusia County, for hospitality interiors that have to be ready before the next season.
3M authorized, LEED and ASID credentialed, statewide in Florida
Working in Daytona Beach,statewide from Florida.
Engineered Group works throughout Florida, statewide, and names Daytona Beach on its own service list. Hotel corridors, lobbies and guest-room doors are the surfaces this work suits best – they date faster than the building does, and refinishing them in place avoids the demolition, the lead time and the lost room nights that a replacement programme costs.
What we install
Daytona Beach work,surface by surface.
Guest-room and corridor doors
Hundreds of slabs, long lead times and a fire rating to preserve – film goes over the door already hung.
View
Corridors between seasons
Corridors and lift lobbies date faster than the rooms and are the cheapest thing to change.
View
Reception desks, bars and casework
Front-of-house millwork takes the most wear and is the most expensive to rebuild.
View
Lobby walls and ceilings
Refinished in place, with no demolition, no dust and no lost room nights.
View
In Daytona Beach
What usuallymatters most here.
How it happens
Four steps,no demolition.
Survey and sample
We look at the substrate as part of the free estimate and tell you what preparation, if any, it needs, then put a physical sample of the exact finish in your hands before anything is ordered.
Dry application
Our own team installs it using a dry application process, with no wallpaper paste, so the film can be placed and adjusted before it is squeegeed down.
The building stays open
The film goes onto the surface you already have, so there is no demolition, no construction dust, no VOCs and no waiting while a replacement is fabricated.
It stays repairable
Architectural film lasts up to 12 years indoors and 5 outdoors, resists water, dirt and normal wear, and if it chips it can be patched so you cannot tell where.
Up to 60%saved vs. full renovation
1,000+patterns to specify from
12year interior lifespan
Class Afire-rated door film
Material lines
Hundreds of patterns,specified and installed.
Across Florida
Work from elsewherein the state.
Who we work with
The people whocall us in Daytona Beach.
Our completed workacross Florida.
We have not published a project in Daytona Beach yet. These are the buildings we have finished elsewhere in the state, each one documented with its own photographs and the materials used.
FAQs
Frequently asked questions.
01Can guest-room doors be refinished without losing the fire rating?
The architectural film we install on doors is Class A fire-rated and goes over the door already hung, so the door assembly and its opening are untouched. Tell us the door type and we will confirm the specification before anything is quoted.
02What area do you serve?
We work throughout Florida, statewide, from single-site jobs to multi-building campuses.
03Can one contractor handle the finishes, the glass and the window film?
Yes. We self-perform the whole interior surface package, walls, ceilings, columns, elevator cabs, doors, millwork, casework and glass, alongside commercial window film, decorative glass film, safety and security film and anti-graffiti film. Our own team installs all of it, so a lobby, its cabs and its glazing run on one schedule under one contractor instead of being split across trades.
04Can I have the film installed by anyone?
We strongly recommend a trained, certified installer. Unlike conventional wallcovering or laminate, these films use a pressure-sensitive adhesive, and the finish you end up with depends heavily on surface preparation, temperature and experience.
05How disruptive is the work?
Very little. The film is applied on site to the surface you already have, so there is no demolition, no construction dust, no VOCs and no operational downtime while a replacement is fabricated and delivered.
06How much can I expect to save?
Clients typically save up to 60% on an architectural finishes project compared with tearing the surface out and replacing it. The exact figure depends on the surface, the substrate and the size of the job, which is why the estimate is free.
07How much does an estimate cost?
Estimates are completely free. Tell us the surface and the scope and we will come back with a real number, along with a sample of the finish.
Working in Daytona Beach?Get a quote.
Tell us the building and the surfaces. We will come and look at it, and the estimate is free.